A novel tridentate nitrogen donor as ligand in copper catalyzed ATRP of methyl methacrylate

A tridentate ligand, BPIEP: 2,6‐bis[1‐(2,6‐diisopropyl phenylimino) ethyl] pyridine, having central pyridine unit and two peripheral imine coordination sites was effectively employed in controlled/“living” radical polymerization of MMA at 90°C in toluene as solvent, Cu^IBr as catalyst, and ethyl‐2‐bromoisobutyrate (EBiB) as initiator resulting in well‐defined polymers with polydispersities M_w/M_n ≤ 1.23. The rate of polymerization follows first‐order kinetics, k_app = 3.4 × 10^?5 s^?1, indicating the presence of low radical concentration ([P*] ≤ 10^?8) throughout the reaction. The polymerization rate attains a maximum at a ligand‐to‐metal ratio of 2:1 in toluene at 90°C. The solvent concentration (v/v, with respect to monomer) has a significant effect on the polymerization kinetics. The polymerization is faster in polar solvents like, diphenylether, and anisole, as compared to toluene. Increasing the monomer concentration in toluene resulted in a better control of polymerization. The molecular weights (M_n,SEC) increased linearly with conversion and were found to be higher than predicted molecular (M_n,Cal). However, the polydispersity remained narrow, i.e., ≤1.23. The initiator efficiency at lower monomer concentration approaches a value of 0.7 in 110 min as compared to 0.5 in 330 min at higher monomer concentration. The aging of the copper salt complexed with BPIEP had a beneficial effect and resulted in polymers with narrow polydispersitities and higher conversion. PMMA obtained at room temperature in toluene (33%, v/v) gave PDI of 1.22 (M_n = 8500) in 48 h whereas, at 50°C the PDI is 1.18 (M_n = 10,300), which is achieved in 23 h. The plot of lnk_app versus 1/T gave an apparent activation energy of polymerization as (ΔE^≠_app) 58.29 KJ/mol and enthalpy of equilibrium (ΔH⁰_eq) to 28.8 KJ/mol. Reverse ATRP of MMA was successfully performed using AIBN in bulk as well as solution. The controlled nature of the polymerization reaction was established through kinetic studies and chain extension experiments. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4996–5008, 2005     

BP人工神经网络用于除草剂活性预测

采用AMI方法研究了10种新型的磺酰脲类除草剂的电子结构，并以原子的Mulliken净电荷和除草剂在不同浓度(100，10mg／L)下对油菜、稗草两种作物的根、茎部位的抑制率为训练样本集。构造并训练得到具有活性预测能力的BP神经网络．结果表明，该BP网络不仅能对训练样本很好拟合。亦能对未知化合物的活性作出很好的预测．     

4-[2-(4,6-二甲氧基-2-嘧啶氧基)苄胺基]苯甲酸正丙酯的合成和晶体结构

2-甲砜基-4,6二甲氧基嘧啶和N-(4-丙氧羰基苯基)-2-羟基苄胺在四氢呋喃溶液中反应, 生成标题化合物4-[2-(4,6-二甲氧基-2-嘧啶氧基)苄胺基]苯甲酸正丙酯,并测定了其晶体结构。该化合物分子式为C23H25N3O5,晶体属单斜晶系,空间群为P2/n,晶胞参数为a = 14.8504(8),b = 9.4420(4),c = 16.3129(9) 牛 = 104.881(1)埃琕 = 2210.6(2) 3,Z = 4,Dc = 1.272 g/cm3,F(000) = 896.00,(MoK? = 0.91 cm-1,R = 0.051,wR = 0.118,获得19761衍射数据,其中独立衍射点5004个。经元素分析、IR、MS和HNMR等对化合物的结构进行了表征。在分子结构中,各有3个不同的共轭平面。嘧啶环和苯环(C(7) C(12)),及苯环(C(14) C(19))的夹角分别为99.18 , 164.15埃?个苯环之间的夹角为94.93啊;衔锍世啻焦瓜蟆?     

高效液相色谱法同时测定三元混配除草剂中的甲黄隆、苄嘧黄隆与乙草胺

用高效液相色谱法测定了三元混配除草剂“农家益”中甲黄隆、苄嘧黄隆、乙草胺的含量。甲黄隆、苄嘧黄隆及乙草胺的平均回收率分别为９８．８１％，９９．１０％，９９．７２％，线性关系良好。所建立的方法用于“农家益”的质量控制具有准确、快速、重现性好等优点。     

酶联免疫吸附分析法测定水样中的阿特拉津

应用阿特拉津半抗原衍生物共价交联于载体蛋白分子上，制成免疫抗原，经免疫得到高质量的兔抗阿特拉津抗血清。经条件优选，建立了测定阿特拉津的酶联吸附分析竞争法，测定性范围为０．０５－５．００μｇ／Ｌ，最低检出限仅为０．０１８－０．０２２μｇ／Ｌ，且精密度高，特异性强。     

均三氮苯类除草剂结构与活性的理论研究

利用Gaussian03程序包中的B3LYP方法,选择6-31G基组对均三氮苯类除草剂及类似衍生物2-(4-溴苄氨基)-4-甲基-6-三氟甲基-1,3,5-三氮苯进行了量子化学计算,从理论上讨论了它们的空间结构、电子结构特征与活性的关系.计算结果表明:三氮苯环与N(7)和N(8)原子形成了共轭结构,分子活性大小与LUMO轨道的得电子能力以及在LUMO轨道中占主要成分的原子有重要关系.N(7)和N(8)连接单个具有推电子能力的基团,有利于生物活性的提高.对于2-(4-溴苄氨基)-4-甲基-6-三氟甲基-1,3,5-三氮苯中,N(8)和C(9)是重要的活性部位,和传统的均三氮苯类除草剂分子相比,与D1蛋白上不同的氨基酸残基发生了键合作用.     

具有生物活性的有机磷化合物的研究V.α—[（取代）芳氧基乙酰氧基]烷基膦酸

通过取代苯氧乙酰氯和α－羟基烷基膦酸酯的缩合反应合成了８种标题化合物，用元素分析，红外，核磁及质谱作了表征，测定了它们的除草活性和植物生长调节活性。     

具有生物活性的有机磷化合物的研究V，α－［（取代）芳氧基乙酰氧基］烷基膦酸酯的合成和性质

过取代苯氧乙酰氯和α－羟基烷基胰酸酯的缩合反应合成了８种标题化合物，用元素分析，红外，核磁及质谱作了表征，测定了它们的除草活性和植物生长调节活性。     

新型除草剂丙酯草醚A环14C均标记合成和鉴定

以U-¹⁴C-对氨基苯甲酸为前体, 通过酯化、缩合、还原和取代四步反应获得了A环¹⁴C均标记的丙酯草醚, 用PHPLC对其进行纯化. 采用HPLC-MS(ESI), MS(EI)和¹H NMR验证了其结构, 通过HPLC(外标法)确定其化学纯度大于98%; HPLC-LSC和TLC-IIA两种方法分析表明, 其放射化学纯度大于98%, 其比活度为1.089±0.011 mCi/mmol. 合成的化学收率和放化收率均为53%.     

A molecular mechanics and semiempirical conformational analysis of the herbicide diuron inhibitor of photosystem II

The potential energy surface (PES) for the herbicide diuron (DCMU), a photosystem II inhibitor, has been extensively investigated using the quantum-mechanical semiempirical molecular orbital methods AM1 and PM3 and molecular mechanics method. A detailed conformational search has been carried out which revealed the occurrence of four genuine minimum energy structures. The relative stability of the conformers and rotational barriers to conformational interconversion were evaluated using distinct theoretical approaches. The results showed that thetrans form of the diuron molecule is more stable than thecis form in all methods, and so it may possibly be the biologically active isomer.